Buying Auto Parts Online

Purchasing auto parts online can be economical, and you can even choose from among a wide selection of used and reconditioned parts that are practically as good as new to save even more money. Whether you need to replace larger items like transmissions or differentials, or small details such as taillights or hood ornaments, you can find virtually any auto parts you may need online.

When it comes to buying a car, there are really only two strategies to choose from. First, you can buy or lease a new car and then trade it in every two or three years for the latest year model. Alternatively, you can purchase a car and drive it for 7 to 10 years to “get your money’s worth from it.”

Obviously, the most economical of these choices for most people will be to keep your car for a number of years, instead of constantly trading in for the latest model — and losing money in the process. But keeping your car for an extended length of time means that you will have to be vigilant about its upkeep, and from time to time you will likely have to replace some parts and have other maintenance and repairs performed.

But when it comes to replacing auto-parts, anyone who has visited a mechanic lately can tell you that costs have skyrocketed. Auto parts, and especially original equipment manufacturer, or OEM, auto-parts can be prohibitively expensive for many makes and models. As a general rule, the more exotic or expensive your car is to begin with, the more expensive the replacement parts will be.

This is especially true if you purchase auto parts from the original manufacturer. But there are several solutions to the high cost of replacing auto-parts. For example, you can choose to purchase so-called third-party parts online. These are auto-parts made by other companies, not the automaker; and they are normally quite a bit less expensive than buying OEM parts.

Third party parts are readily available for nearly any model of car or truck, and often the price difference will be substantial. For example, replacing a radiator for a standard American-made sedan can cost as much as $800 if you purchase original equipment manufacturer parts. But when you buy a replacement radiator for the same car from a third-party manufacturer, it is possible to pay as little as $250. Obviously, that’s a huge savings, and something you will definitely want to consider the next time you need to replace auto-parts for your vehicle.

But there is another option as well: used auto-parts are available to fit most American and foreign made cars. Used or “reconditioned” parts are often sold for a fraction of the price of new, and in most cases they are just as reliable to use.

Although you can find used auto-parts at specialty dealers, auto shops and parts stores, by far the best prices are to be found online. There are several big-name auto-parts stores online that specialize in used or reconditioned parts. Most of these sites have an easy to use search function that will allow you to see if they have the part you need in only a second.

This will save you an enormous amount of time over the “old way” of doing things: driving all over town and asking if the part is available at each different location you hit. For this reason, buying auto parts online is much more convenient and can also save you a great deal of money.

Overheating Car – Causes and Short – Term Solutions

Overheating of the engine not only occurs in the summer, but can also occur in daily driving. In particularly, high-speed running cars, engines, and air-conditioning systems can cause boiling phenomenon when the water temperature is too high. It’s dangerous to overheat the engine. It may hard luck that what can damage the engine. When driving on highways at a higher speed, or when climbing a car, if the pointer of the water temperature gauge enters the red zone and stays high, appropriate measures should be taken at this time. Here’s how to handle the engine overheating.

There are many causes of overheating, including insufficient coolant, cooling fan cooling the coolant has failed, thermostat failure, and coolant temperature sensor failure. If you deal with it improperly, it can lead to an expensive engine failure. Therefore, timely detection and proper disposal of overheating can effectively reduce losses.

What is the effect of engine overheating on the engine?

1. Reduced aeration efficiency, resulting in a drop in engine power.

2. The propensity for pre-ignition and deflagration increases, which disrupts the normal operation of the engine; at the same time, it also causes early damage due to additional impact loads on the parts.

3. The normal gap of the moving parts is destroyed, so that the parts can’t move normally, or even damage.

4. The mechanical properties of the metal material are reduced, causing damage to the part’s deformation.

5. The deterioration of the lubrication condition exacerbates the friction and wear of the parts.

How is the engine overheating caused?

First, poor engine cooling: Poor engine cooling can cause the water temperature in the tank to be too high. When longer the water tank is used, the more internal scale will build up, resulting in poor heat dissipation in the radiator. The water with too high temperature will not release heat, and it will evolve into a “pan”. In addition, the ventilation hole of the radiator is also a common cause of poor heat dissipation. If the external blockage is not ventilated, use a water gun to clean it up. If the inside of the radiator is blocked, then clean it with a cleaning solution.

Second, the cooling system is not working properly, resulting in poor heat dissipation. At this time, check the tightness of the fan belt and whether the fan blades are deformed or broken.

Third, the thermostat automatically adjusts the amount of water entering in to the radiator according to the temperature of the cooling water, so as to ensure that the engine works within a suitable temperature range, which can play a role in saving energy consumption. If the engine is overheated, check that the thermostat is working properly. Starts at 70°C and fully open at 83°C. When the height of the fully opened valve is not less than 9 mm, the thermostat can be put into the water for heating inspection. If the thermostat can’t be opened or the opening degree is not enough, the thermostat needs to be replaced.

Finally, be careful not to shut down the engine when the engine is overheated. If the fan belt and coolant circulation are normal, do not turn off the engine and wait for the engine to cool. Normally, People tend to feel that the engine cools down more easily after the flame out. Actually, after cooling off, the cooling fan and coolant circulation will stop, which will make the engine hotter. There are two spiral fans on the side of the engine compartment bumper. One is a cooling fan that cools the engine while the engine is working, and the other one is an air-conditioning fan that is used when the air conditioner is turned on. Therefore, if the fan belt is not broken when the car is overheated, it is better not to turn off the engine, but also to turn on the air conditioner at the same time, so that the engine cooling rate will be faster.

The Benefits of Recycling Steel in Junk Cars

Recycling junk cars has a huge impact on our environment, economy, and more; an impact that is entirely positive. There are many benefits of junk car recycling, most of which involve steel. Continue reading to learn why it is important to recycle the steel in junk cars, and how you can personally contribute to this wonderful initiative.

Most Vehicles are Mostly Steel

Most vehicles are manufactured with steel because it is a highly durable, strong, and dependable metal. Not only can it protect drivers and passengers, it can be recycled and repurposed over and over again. In fact, most steel is made from existing steel materials, which does wonders to preserve our natural resources, conserve energy, and reduce harmful emissions produced by metal refining factories. According to the Steel Recycling Institute (SRI), “recycling a single ton conserves 2500 pounds of iron ore, 1400 pounds of coal, and 120 pounds of limestone.”

Vehicles, on average, are 60% steel and iron. The shell alone is 25% of the total amount of steel in a car or truck, on average. This includes the quarter panels, trunk, hood, and doors. Additionally, internal parts and metal components are recycled for their steel, such as automotive parts, gaskets, circuit boards, and more.

Steel Recycling

Motorized vehicles are among the most frequently recycled consumer product in the country. Regardless of who owned them or what happened to them, virtually all cars end up in the recycling process. According to the Steel Recycling Institute (SRI), more than 14 million tons of steel from cars are recycled each year. This can actually be argued as a 100% recycling rate among vehicles no longer suited for the road!

Junk Car Salvaging Process

The junk car recycling process, although not too complicated, requires a fleet of highly-specialized equipment and technology. Most metal reprocessing centers will start by draining the vehicle of any remaining fluids to stay within environmentally responsible recycling practices. These fluids include transmission fluid, brake fluid, power steering fluid, windshield wiper fluid, radiator fluid, battery fluid, and motor oil. Next, they will begin to dismantle the vehicle of all its reusable parts, like wheels, tires, headlights, doors, windows, fenders, bumpers, trunk lids, stereos, and any operational or repairable auto parts.

After a vehicle is finished with the draining and dismantling process, all that’s left are scattered hulks. This is usually shredded in an industrial metal shredder, which is an enormous and innovative machine that can shred large hulks down to fist-sized pieces in less than 45 seconds. These pieces are a compilation of steel, non-steel metals, and fluff (non-reusable rubbers, plastics, glass, etc.). A large magnetic sorter is used to separate the steel and iron pieces from the rest of the shredding material, which are then shipped all across the country to various metal buyers, reprocessed, and steel mills.